Rear

1. Raise and support rear of vehicle.
2. Remove bolt and nut securing suspension arm No. 2 to axle carrier.
3. Scribe alignment marks on suspension arm No. 2 alignment cam plate to aid during installation, then remove bolt securing suspension arm No. 2 to body and remove arm. When removing bolt securing suspension arm to body, turn the bolt only. Do not turn the cam.
4. Remove bolt and nut securing suspension arm No. 1 to axle carrier.
5. Remove bolt and nut securing suspension arm No. 1 to body, then remove arm.
6. Replace bushings with installer tool No. 09726-32010.
7. Reverse procedure to install. Torque all bolts to specification with vehicle weight on suspension.