System Specifications
TIMING:Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing More than 16° BTDC At Idle [1]
[1] Refer to ADJUSTMENT PROCEDURES.
RESISTANCE:
EGR Gas Temperature Sensor:
At 50°C (122°F) 69.4-88.5K Ohms
At 100°C (212°F) 11.9-14.4K Ohms
At 150°C (302°F) 2.8-3.6K Ohms
EGR Vacuum Switching Valve:
At 20°C (68°F) 33-39 Ohms
Oxygen Sensor Heater:
At 20°C (68°F) 5.1-6.3 Ohms
Ignition Coil:
Primary 0.4-0.5 Ohms
Secondary 10.2-13.8K Ohms
Distributor Signal Generator;
Between terminals G+ and G- 140-180 Ohms
Between terminals Ne+ and G- 140-180 Ohms
Coolant Temperature and Air Temperature Sensors:
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms
At 80°C (176°F) 0.2-0.4K Ohms
Throttle Position Sensor:
CLEARANCE BETWEEN BETWEEN TERMINALS RESISTANCE
STOP SCREW AND LEVER
0.35mm (0.014in) IDL-E2 Less than 2.3K Ohms
0.59mm (0.023in) IDL-E2 Infinity
Full Open VTA-E2 3.3-10K Ohms
-- Vcc-E2 3-7K Ohms
Air Flow Meter:
BETWEEN TERMINALS RESISTANCE
VS-E2 200-400 Ohms
(Measuring plate fully closed)
20-3000 Ohms
(Measuring plate fully open)
VC-E2 100-300 Ohms
FC-E1 Infinity
(Measuring plate closed)
Zero
(Measuring plate open)
THA-E2
At -20°C (-4°F) 10-20K Ohms
At 0°C (32°F) 4-7K Ohms
At 20°C (68°F) 2-3K Ohms
At 40°C (104°F) 0.9-1.3K Ohms
At 60°C (140°F) 0.4-0.7K Ohms