Electrical Specifications

TIMING:

Base Ignition Timing 10° BTDC At Idle [1]
Advance Ignition Timing More Than 16° BTDC At Idle [1]

[1] Refer to ADJUSTMENT PROCEDURES in COMPUTERIZED ENGINE CONTROLS.

RESISTANCE:

Cold Start Injector:
At 20°C (68°F) 3 - 5 Ohms

Cold Start Injector Time Switch:
Between terminals STA and STJ below 30°C (86°F) 20 - 40 Ohms
Between terminals STA and STJ above 40°C (104°F) 40 - 60 Ohms
Between terminals STA and Ground 20 - 80 Ohms

Port Fuel Injector:
At 20°C (68°F) Approx. 13.8 Ohms