Technical Instructions and Completion Label
SSC # K05
TECHNICAL INSTRUCTIONS
REPLACEMENT PROCEDURE FOR FRONT SEAT LAP BELT GUIDE
(1) Adjust the front seat to the foremost position.
(2) Release the guide latch and remove the lap belt from the guide.
(3) Remove the original lap belt guide by removing screw A.
(4) Install the new lap belt guide (inner) with screw A.
Part No. RH: 73101-32010
LH: 73102-32010
Install the new lap belt guide (outer) with screw B.
Pass the lap belt through the guide and complete installation of the guide with screw C.
7. Completion Label
1. After completing repair and before returning vehicle to the customer, a SSC completion label that is enclosed in the owner's letter must be affixed to the firewall, make sure that the surface is clean and dry to ensure proper adhesion of the label.
2. The label is to be filled out as follows:
3. Additional SSC completion labels (P/N 00410-01917) may be ordered through the non-parts system on a 1450 order form or through the TDN system.