Required Tools & Materials

A. Required Equipment:
1. R-12 recovery/recycling/recharging equipment
2. R-134a recovery/recycling/recharging equipment
3. Graduated measuring cylinder (for compressor oil)
4. Valve core remover for service valves
5. Air conditioner manifold gauge set
6. Torque Wrench Kit, 00002-50284-01, contains the following:*1

- 14 mm 00002-51410-01
- 17 mm 00002-51710-01
- 22 mm 00002-52216-01
- 27 mm 00002-52724-01

B. Required Parts & Materials:*2
1. R134a Refrigerant
2. Service Fitting Adaptors
3. Caution Labels
4. Compressor oil
5. Receiver/Dryer for R134a
6. 0-Rings for hose connections
7. 0-Rings for Compressor Extension Housing / Service Plate *3
8. Loctite 262 or equivalent

NOTE:

*1 required size(s) dependant upon specific model.

*2 see application information section of this bulletin.

*3 All 10P compressors require installation of compressor 0-rings. It is not necessary to replace compressor 0-rings on vehicles produced from 1/93 or on DIO/PIO A/C systems with compressor production serial numbers after 1N0001 (10PA type compressors and TV type compressors).