Required Tools & Materials

A. Required Equipment:

1. R-12 recovery/recycling/recharging equipment

2. R134a recovery/recycling/recharging equipment

3. Graduated measuring cylinder (for compressor oil)

4. Valve core remover for service valves

5. Air conditioner manifold gauge set

6. Torque Wrench Kit, 00002-50284-01, contains the following:*1

^ 14 mm 00002-51410-01

^ 17 mm 00002-51710-01

^ 22 mm 00002-52216-01

^ 27 mm 00002-52724-01

B. Required Parts & Materials: *2

1. R134a Refrigerant

2. Service Fitting Adaptors

3. Caution Labels

4. Compressor oil

5. Receiver/Dryer for R134a

6. 0-Rings for hose connections

7. 0-Rings for Compressor Extension Housing/Service Plate *3

8. Loctite 262 or equivalent

NOTE:
*1 required size(s) dependant upon specific model.

*2 see application information section of this bulletin.

*3 All 10P compressors require installation of compressor 0-rings. it is not necessary to replace compressor 0-rings on vehicles produced from 1/93 or on DIO/PIO A/C systems with compressor production serial numbers after 1N0001 10PA type compressors and TV type compressors).