Rear Disc Brake ServiceSteps

NOTES, WARNINGS, AND HINTS
Parts Reminder List
PARTS REMINDER LIST
Parts Reminder List
RECOMMENDED TOOLS
Tools and Equipment

PROCEDURES
1. Check for applicable Technical Service Bulletins (TSB).
2. Perform Initial Test Drive and Diagnosis By Symptom.
Testing and Inspection
3. Begin repairs, lift and support rear of vehicle, remove rear wheels.
4. Remove caliper assembly.
Service and Repair
5. Inspect brake linings and caliper assembly.
Testing and Inspection
6. Rebuild or replace caliper assembly if necessary.
Service and Repair
7. Inspect brake rotor/hub assembly, replace or resurface if necessary.
Testing and Inspection
8. Remove rotor/hub and inspect parking brake shoes, replace if necessary.
Service and Repair
9. Install pads/linings.
Service and Repair
10. Install caliper.
Service and Repair
11. Bleed brakes.
12. Install tire and wheel assembly.
Installing Tire and Wheel Assembly
13. Perform After Repairs Test Drive.
Testing and Inspection

ENVIRONMENTAL AND SAFETY CONCERNS
Technician Safety Information