With Rear Disc Brakes

ADJUST PARKING BRAKE SHOE CLEARANCE
- Remove rear wheel.
- Temporarily reinstall the hub nuts.
- Remove the hole plug.
- Turn the adjuster and expand the shoes until the rotor disc locks.
- Return the adjuster eight notches.
- Install the hole plug.
- Reinstall rear wheel and torque.

BEDDING DOWN (SEATING) PARKING BRAKE SHOES AND DISC
- Drive the vehicle at about 50 km/h (31 mph) on safe, level and dry road.
- With the parking brake release button pushed in, pull on the lever with 9 kg (19.8 lb, 88 N.m) of force.
- Drive the vehicle for about 400 meters (0.25 mile) in this condition.
- Repeat this procedure two or three times.
- Recheck and adjust parking brake lever travel