Engine - Updated Mounts and Tightening Torque
REFERENCE ENGINESNUMBER 007
DATE 10-11-85
MODEL COROLLA DIESEL (CE)
Engine Mount:
To reduce body vibration during initial clutch engagement, the following changes have been made:
1. The front engine mounting insulator has been changed from a sheer type to a cylindrical type.
2. The thickness of the rear engine mounting bracket has been increased from 3.8 mm (0.15 in.) to 4.5 mm (0.18 in.).
3. Due to these modifications, the tightening torque of the rear engine mounting insulator attaching bolts has been changed from 400 kg-cm (350 in.lbs.) to 490 kg-cm (425 in.lbs.).
NOTE: If the front engine mounting insulator is replaced, the rear engine mounting bracket and insulator attaching bolts should also be replaced.
PRODUCTION EFFECTIVE:
Applicable Models Production Date From VIN
CE82 March 1985 JT2CE82##F3010500
PART NUMBER INFORMATION:
Prev. Part No. New Part No. Part Name
12361-64031 12361-64100* Insulator, Engine Mounting, Front
12311-63031 12311-64070* Bracket, Engine Mounting, Front
91621-61020 90105-12054* Bolt (Bracket)
- 90179-12016* Nut (Bracket)
91652-61025 90119-10358* Bolt (Insulator Attaching)
12321-63031 12321-64100* Bracket, Engine Mounting, Rear
91652-61025 90119-10358* Bolt (Insulator Attaching)
* Interchangeable as a set only.