| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Front | 1.2 | 0.0 | B | Includes: Repack Wheel Bearings. Clean, Lube or R&R Brake Hardware as necessary. Make all necessary adjustments. |
| Note |
| To R&R or Renew Rotor, Add |
| One Side | 0.4 | 0.0 | | |
| To Reface Rotor, Add |
| One Side | 0.7 | 0.0 | | |
| Rear | 1.2 | 0.0 | B | Includes: Repack Wheel Bearings on Drums. Clean, Lube or R&R Brake Hardware as necessary. Make all necessary adjustments. |
| Both Front and Rear |
| With Rear Drums | 2.4 | 0.0 | B | Includes: Repack Wheel Bearings on Drums. Clean, Lube or R&R Brake Hardware as necessary. Make all necessary adjustments. |
| With Rear Discs | 2.0 | 0.0 | B | Includes: Repack Wheel Bearings. Clean, Lube or R&R Brake Hardware as necessary. Make all necessary adjustments. |
| Note |
| To R&R or Renew Rotor, Add |
| One Side | 0.4 | 0.0 | | |
| To Reface Rotor, Add |
| One Side | 0.7 | 0.0 | | |
| Add the Following Operations After Pads or Shoes Are Removed |
| Front Grease Seals, Renew |
| One Side | 1.0 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Wheel Bearings, Renew |
| One Side | 1.2 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Caliper, Renew |
| Front |
| One Side | 0.4 | 0.0 | B | |
| Calipers R&R & Overhaul |
| Front |
| One Side | 0.6 | 0.0 | B | |
| Wheel Cylinder, Renew |
| One Side | 0.5 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Wheel Cylinder R&R & Overhaul |
| One Side | 0.6 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Parking Brake Adjust | 0.5 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Hydraulic System Overhaul |
| Without Rear Disc | 5.0 | 0.0 | B | Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System. |