Removal and Installation

Instrument Panel Passenger Airbag Assy:

REPLACEMENT

1. PRECAUTION
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. REMOVE GLOVE COMPARTMENT DOOR ASSY
4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2




5. SEPARATE PASSENGER AIRBAG CONNECTOR
a. Disconnect the front passenger airbag connector.




6. REMOVE INSTRUMENT PANEL PASSENGER AIR BAG ASSY
a. Remove the bolt from the instrument panel reinforcement.
b. Remove the 2 nuts and instrument panel passenger air- bag assy from the instrument panel.

7. INSPECT INSTRUMENT PANEL PASSENGER AIR BAG ASSY

8. INSTALL INSTRUMENT PANEL PASSENGER AIR BAG ASSY

Torque:
Nut: 5.6 N-m (58 kgf.cm, 50 in.lbf)
Bolt: 20 N-m (200 kgf.cm, 14 ft.lbf)

9. INSPECT SRS WARNING LIGHT