Combination Meter Disassembly and Assembly

COMBINATION METER ASSEMBLY

HINT: The installation is in the reverse order of the removal. However, when there is a special point concerning the installation, it is indicated.

OVERHAUL

1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
2. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH
5. REMOVE COMBINATION METER ASSEMBLY




6. REMOVE COMBINATION METER GLASS
a. Remove the 2 screws.
b. Disengage the 6 claws and remove the combination meter glass.