Clearing Trouble Codes

NOTE: This is the only information provided by the manufacturer for Clearing Diagnostic Trouble Codes for this system.

CLEARING DIAGNOSTIC TROUBLE CODES




1. Using SST, connect terminals Tc and CG of the DLC3.
SST 09843-18040

2. Turn the ignition switch ON.

3. Clear the DTC stored in ECU by depressing the brake pedal 8 or more times within 5 seconds.

4. Check that the warning light shows the normal code.

5. Remove the SST from the terminals of DLC3.
SST 09843-18040

HINT: Cancellation cannot be done by removing the battery cable or ECU-IG fuse.