Sunroof / Moonroof: Service and Repair
REMOVAL1. REMOVE SUNSHADE TRIM
2. REMOVE LOCK HANDLE AND LOCK BASE
a. Remove the 2 screws and lock garnish.
b. Extra cab:
Remove the lock handle and holders with 2 bolts.
c. Double cab
Remove the lock handle and holders with 2 nuts.
Torque: 3.0 N.m (30 kgf.cm, 26 in.lbf)
d. Remove the lock base and spacer with 2 screws.
Torque: 6.0 N.m (60 kgf.cm, 52 in.lbf)
3. REMOVE WIND DEFLECTOR PANEL
a. Remove the clip as shown in the illustration.
b. Using a screwdriver, remove the wind deflector panel as shown in the illustration.
c. Employ the same manner described above to the other side.
4. REMOVE REMOVABLE ROOF AUXILIARY CATCH
Remove the screw and auxiliary catch.
5. REMOVE ROOF HEADLINING
6. REMOVE REMOVABLE ROOF HINGE CASE
a. Remove the 2 bolts and hinge case.
Torque: 3.5 N.m (35 kgf.cm, 30 in.lbf)
b. Employ the same manner described above to the other side.
INSTALLATION
Installation is in the reverse order of removal procedure.