Front
FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH REPLACEMENTHINT: This procedure is provided for the replace on the LH side. Replace the other side in the same way.
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
3. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
a. Remove the 3 nuts and engine mounting insulator.
4. REMOVE FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Remove the 2 bolts on the front side of the lower suspension arm.
b. Remove the bolt and nut on the rear side of the lower suspension arm.
c. Remove the lower suspension arm.
d. Remove the lower suspension arm bushing stopper from the lower suspension arm shaft.
5. INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
a. Install the lower suspension arm bushing stopper to the lower suspension arm shaft.
b. Install the lower suspension arm.
c. Install the lower suspension arm with the 2 bolts to the front side.
Torque: 200 Nm (2,040 kgf-cm, 148 ft. lbs.)
d. Install the lower suspension arm with the bolt and nut to the rear side.
Torque: 206 Nm (2,100 kgf-cm, 152 ft. lbs.)
6. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
a. Install the engine mounting insulator with the 3 nuts.
Torque: 87 Nm (890 kgf-cm, 64 ft. lbs.)
7. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
8. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE