Crankshaft Main Bearing

Main Bearing Oil Clearance
Standard (No.1 & No.4) 0.014 - 0.034 mm
Maximum (No.1 & No.4) 0.05 mm
Standard (No.2 & No.3) 0.026-0.046 mm
Maximum (No.2 & No.3) 0.06 mm

Removal:

Installation:

Main Bearing Cap Torque
First Pass (12 Pt. Head) 22 Nm
Second Pass (12 Pt. Head) 90 Degrees
(6 Point Head) 27 Nm

Bearing Cap Bolt
Standard Diameter 7.5-7.6 mm
Minimum Diameter 7.2 mm