Radio/Stereo: Service and Repair

RADIO RECEIVER ASSEMBLY

REPLACEMENT

1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER




2. REMOVE INTEGRATION CONTROL & PANEL ASSEMBLY
a. Remove the 6 bolts.
b. Disconnect the connectors, then remove the radio receiver assembly and integration control panel.

3. REMOVE RADIO RECEIVER ASSEMBLY





a. Remove the 4 bolts, 2 screws and radio bracket No.1




b. Remove the 4 bolts, 2 screws and radio bracket No.2.
c. Remove the radio receiver assembly to the integration control panel assembly.