Removal and Installation

ON-VEHICLE INSPECTION

NOTE: Before changing the starter, check these items again:
- Connector connection
- Accessory installation, e.g.: theft deterrent system







COMPONENTS

REMOVAL




REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the nut, and disconnect the starter wire.
c. Remove the 2 bolts and starter.

INSTALLATION

INSTALL STARTER




a. Install the starter with the 2 bolts.

Torque: 39 Nm (400 kg.cm, 29 ft.lb)

b. Connect the starter wire with the nut.

Torque: 8.8 Nm (90 kg.cm, 78 in.lb)

c. Connect the starter connector.