Service Hints

C3 CRUISE CONTROL ACTUATOR WITH ECU
7-GROUND : 4 pulse with 1 rotation of the rotor shaft
6-GROUND : Approx. 12 volts with brake pedal depressed
4-GROUND : Approx. 12 volts with ignition SW at ON position
10-GROUND : Always continuity
9-GROUND : Always continuity

C16 CRUISE CONTROL SW [COMB. SW]
5-3 : Closed with CRUISE SW on
4-3 : Approx. 68 Ohms with RES/ACC SW on
: Approx. 198 Ohms with SET/COAST SW on
: Approx. 418 Ohms with CANCEL SW on