Parking Pawl: Service and Repair

ON-VEHICLE REPAIR





1. REMOVE VALVE BODY
2. REMOVE PARKING LOCK PAWL BRACKET





3. REMOVE SPRING FROM PARKING LOCK PAWL SHAFT





4. REMOVE PARKING LOCK PAWL AND SHAFT
5. INSTALL PARKING LOCK PAWL AND SHAFT





6. INSTALL SPRING TO PARKING LOCK PAWL SHAFT





7. INSTALL PARKING LOCK PAWL BRACKET
Torque: 7.4 Nm (75 kgf-cm, 65 inch lbs.)

HINT:
- Push the lock rod fully forward.
- Check that the parking lock pawl operates smoothly.

8. INSTALL VALVE BODY