Disassembly and Reassembly

DISASSEMBLY

1. REMOVE HEATER RADIATOR
a. Remove the 3 screws and 2 plates and clamp.
b. Pull out the heater radiator.

c. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes.

HINT: At the time of reassembly, please refer to the following item.

Do not reuse 2 O-rings.

2. REMOVE AIR VENT DUCT
Remove the 2 screws and duct.

REASSEMBLY
Reassembly is in the reverse order of disassembly.