Oil Cooler: Service and Repair

REMOVAL
1. DRAIN ENGINE COOLANT
2. DISCONNECT OIL COOLER HOSES
Disconnect the No.1 and No.2 oil cooler hoses.





3. REMOVE OIL COOLER
Remove the bolt, relief valve, gaskets and oil cooler.
Torque: 59 Nm (600 kgf-cm, 43 ft. lbs.)

HINT: At the time of installation, please refer to the following items.
- Replace the O-ring with a new part.
- Use a new gasket to the relief valve.

INSPECTION
1. INSPECT OIL COOLER
Check the oil cooler for damage or clogging.
If necessary, replace the oil cooler.

INSTALLATION
Installation is in the reverse order of removal.