Rear Door Glass Removal and Installation
Rear Door Glass Removal and Installation
Rear Door Window Components
Removal
1) Remove rear door inner garnish (1) (Hatchback).
2) Remove door trim mounting screws (2).
3) Remove door trim (1) as shown.
4) Remove door outer garnish (1) (Hatchback).
5) Remove door outer weather-strip (2).
6) Remove door inner weather-strip (3).
7) Remove door trim bracket (1).
8) Remove door sealing cover (2).
9) Detach rear part of glass run (2) with rear door sash (1).
10) Remove rear door partition glass (1) with rear door partition weather-strip (2) (Sedan).
11) Remove door glass as shown.
Installation
Reverse removal procedure noting the following instructions.
- Tighten door sash mounting bolts and screw (" 1" - "3") according to numerical order as shown in figure.
- If there is deformity for glass run, replace it with a new one.
- Secure door sealing cover (1) with adhesive (2).
- Install rear door trim.
Rear door trim attaching order
(1) -> (2) -> (3) -> (4) -> (5) -> (6) -> (7)