Front Fender Removal and Installation

Front Fender Removal and Installation

Front Fender Components

Removal

1) Remove side sill splash guard and front fender splash guard (if equipped) referring to Service and Repair Splash Guard Removal and Installation (If Equipped).
2) Remove front fender lining.
3) Remove front bumper referring to [1][2]Diagrams Front Bumper and Rear Bumper Components.
4) Remove headlight assembly referring to Service and Repair Headlight Housing Removal and Installation.
5) Disconnect connector from side turn signal light (if equipped).
6) Remove front fender cover.
7) Remove front fender.

Installation

Reverse removal procedure to install front fender noting the following instruction.

- If paint on fender bolt is peeled off, be sure to apply paint again.
- Adjust panel clearance referring to Panel Clearance.