i-AWD Warning Light Does Not Come ON at Ignition Mode to ON but Engine Stops

i-AWD Warning Light Does Not Come ON at Ignition Mode to ON but Engine Stops

Troubleshooting

1. Combination meter circuit check

Connect SUZUKI scan tool to DLC with ignition mode of keyless push start system in "OFF".
Push engine switch to change ignition mode to "ON".
Select the "Indicator" function in "Active Test". Scan Tool Active Test
Check i-AWD warning light turns on.

Is it in good condition?
YES -
Intermittent trouble.
NO -
Substitute a known-good combination meter and recheck DTC. If i-AWD warning light still remains off, substitute a known-good 4WD control module and recheck DTC.