FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Fuel Injector On-Vehicle Inspection




Fuel Injector On-Vehicle Inspection

1) Using sound scope (1) or the like, check operating sound of injector (2) when engine is running or cranking.

Cycle of operating sound should vary according to engine speed.

If no sound or unusual sound is heard, check injector circuit (wire or connector) or injector.





2) Disconnect connector (1) from injector.
3) Check resistance between terminals of injector.

If resistance is out of reference value greatly, replace.

Reference resistance of fuel injector
11.6 - 12.4 ohms at 20 °C, 68 °F





4) Connect connector to injector securely.