Procedures

Centering Contact Coil Cable Assembly

1. Check that vehicle's wheels (front tires) are set at straight-ahead position.
2. Check that ignition switch is at LOCK position.
3. Turn contact coil counterclockwise slowly with a light force till contact coil will not turn any further.

NOTE: Contact coil can turn about 5 turns at the maximum, that is, if it is at the center position, can turn about two and a half turns both clockwise and counterclockwise.





4. From the position where contact coil became unable to turn any further (it stopped), turn it back clockwise about two and a half rotations and align center mark with alignment mark (1).