Sun Shade: Testing and Inspection

INSPECTION

CHECK FOR MOVING LOAD OF SUNSHADE

1. Attach a spring scale to sunshade edge using a cloth.
2. Pull the spring scale to check the moving load of the sunshade.

Moving load of sunshade:
14 ± 6 N (1.43 kgf, 3.1 lbf ± 0.61 kgf, 1.3 lbf)







NOTE: Moving load is larger at the beginning of pulling a spring scale, so take a spring scale reading while sunshade sliding smoothly.

3. If the inspection result exceeds the standard value, check if the installation to sunshade or frame assembly is sufficient, and replace if necessary.