Carpet: Service and Repair
Floor MatREMOVAL
1. Remove the front seat assembly.
2. Remove the rear seat cushion assembly.
3. Remove the console box assembly.
4. Remove the console front side cover.
5. Remove the lower inner trim.
6. Remove the pull handle cover.
1. Open the cover by using a flat tip screwdriver.
2. Remove the screw and remove the pull handle cover.
7. Take out the floor mat from the vehicle.
1. Remove the clips from the floor mat.
2. Remove the mat hook on both sides.
3. Take out the floor mat after folding down.
INSTALLATION
Install each part in the reverse order of removal.
NOTE: Secure the mat firmly with hook and clip.