Procedures
FORCED DRIVEIf the glass lid does not operate or the sunroof motor is not supplied with power, move the glass lid using the hexagon wrench.
Width across flat 5 mm (0.20 in)
CAUTION: After a forced operation, make sure to perform an initialize operation.
1. Remove the spot map light. (Models without EyeSight)
2. Remove the stereo camera cover. (Models with EyeSight)
3. Insert the hexagon wrench securely until it touches the motor shaft end.
4. Turn the hexagon wrench, and move the glass lid.
- Turning right, the glass lid open.
- Turning left, the glass lid close.
CAUTION: Be careful not to damage the adjacent parts with the rod end when moving the glass lid with the hexagon wrench.
