Brake Pipe

Brake Pipe

REMOVAL

CAUTION:
^ Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. Using a tester above such circuits may cause malfunction of airbag system.
Follow the cautions for "AIRBAG SYSTEM" in this case.
^ Be careful not to damage the airbag system wiring harness when servicing the center brake pipe.
^ When removing the brake pipe, do not bend.

NOTE:
The airbag system wiring harness is routed near the center brake pipe.

INSTALLATION

CAUTION:
^ Yellow connectors and harnesses with yellow tapes around them are the connectors and harnesses for the airbag system. Using a tester above such circuits may cause malfunction of airbag system.
Follow the cautions for "AIRBAG SYSTEM" in this case.
^ Be careful not to damage the airbag system wiring harness when servicing the center brake pipe.
^ When installing the brake pipe, do not bend.
^ After installing the brake pipe and hose, perform air bleed.
^ After installing the brake hoses, make sure that they do not contact the tires or suspension assembly, etc.

NOTE:
The airbag system wiring harness is routed near the center brake pipe.

Tightening torque:
Front brake pipes & hoses:
Center & rear brake pipes and hoses:

INSPECTION

Check the pipe for crack and damage, and also check the connection for fluid leakage. If any faulty is found, repair or replace the relevant part.

NOTE:
Use a mirror when inspecting back sides and other locations which are hard to see.