Removal and Replacement

Glass Lid

REMOVAL

1. GLASS LID

1. Completely close the lid assembly - sunroof, and open the sunshade assembly.
2. Remove the TORX(R) bolt, and then remove the lid assembly - sunroof.

CAUTION: Be careful not to damage the lid assembly - sunroof.

PREPARATION TOOL:
TORX(R) T25







2. DEFLECTOR ASSEMBLY

1. Open the lid assembly - sunroof and the sunshade assembly.
2. Remove the deflector assembly - sunroof.
1. Remove the spring from the rail assembly - sunroof.







2. While lifting up the deflector assembly - sunroof, remove the deflector assembly - sunroof from the hook on the rail assembly - sunroof.







INSTALLATION

1. GLASS LID

Install each part in the reverse order of removal.

Tightening torque:
Refer to "COMPONENT" of "General Description". [Ref. to COMPONENT, General Description.]

2. DEFLECTOR ASSEMBLY

1. Install each part in the reverse order of removal.
2. After installation, measure the height from the roof panel when deflector assembly - sunroof is activated.