Procedures

FORCED DRIVE

If the lid assembly - sunroof does not operate or the motor assembly is not supplied with power, move the lid assembly - sunroof using the hexagon wrench.

PREPARATION TOOL:
Hexagon wrench: width across flat 4 mm (0.16 in)

CAUTION: After a forced operation, make sure to perform an initialize operation.

1. Remove the light assembly - map.
2. Insert the hexagon wrench securely until it touches the motor shaft end.
3. Turn the hexagon wrench, and move the lid assembly - sunroof.
- Turning right, the lid assembly - sunroof opens.
- Turning left, the lid assembly - sunroof closes.

CAUTION: Be careful not to damage the adjacent parts with the rod end when moving the lid assembly - sunroof with the hexagon wrench.