Rear

Rear Wiper Arm

REMOVAL
1. Detach the wiper arm cover (A).
2. Remove the nut (B) to remove the wiper arm.






INSTALLATION
1. Install in the reverse order of removal.
2. Operate the rear wiper once.
3. Align the blade with the marking (A) of the glass.






Tightening torque: Refer to "COMPONENT" of "General Description".

Tightening torque
T1: 7.0 N.m (0.71 kgf-m, 5.2 ft-lb)
T2: 8.0 N.m (0.82 kgf-m, 5.9 ft-lb)