Overhaul
Air Intake BootDISASSEMBLY
Remove the air intake boot from the turbo duct.
ASSEMBLY
Assemble in the reverse order of disassembly.
Tightening torque: 2.5 N.m (0.3 kgf-m, 1.8 ft-lb)
DISASSEMBLY
Remove the air intake boot from the turbo duct.
ASSEMBLY
Assemble in the reverse order of disassembly.
Tightening torque: 2.5 N.m (0.3 kgf-m, 1.8 ft-lb)