PCV Valve

PCV Valve

REMOVAL

CAUTION: Do not remove unless the PCV valve is broken.

1. Remove the collector cover.
2. Remove the intake manifold.
3. Remove the secondary air combination valve RH.
4. Disconnect the vacuum hose (A) from the PCV valve and remove the PCV valve from the PCV connector.

NOTE: Pinch the clamp of the PCV connector by fitting the cut out in the ST with the protrusion on the clamp as shown in the figure, and unlock the clamp.

ST 18353AA000 CLAMP PLIERS






INSTALLATION

1. Install the PCV valve to the PCV connector and connect the vacuum hose (A) to the PCV valve..

NOTE: Use a new clamp for the PCV connector clamp, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.

ST 18353AA000 CLAMP PLIERS






2. Install the secondary air combination valve RH.
3. Install the intake manifold.
4. Install the collector cover.