PCV Valve Hose: Service and Repair

PCV Hose Assembly

REMOVAL

CAUTION: Do not remove unless the hose and the diagnostics connector are broken.

1. Remove the collector cover.
2. Remove the intake manifold.
3. Remove the turbocharger.
4. Remove the intake duct.
5. Remove the PCV hose assembly from the intake duct and the cylinder block RH.

NOTE: Pinch the clamp of the PCV hose assembly by fitting the cut out in the ST with the protrusion on the clamp as shown in the figure, and unlock the clamp.
ST 18353AA000 CLAMP PLIERS






INSTALLATION

1. Install the PCV hose assembly to the intake duct and the cylinder block RH.

NOTE: Use a new clamp for the PCV hose assembly, fit the cut out in the ST with the protrusion on the clamp as shown in the figure, and lock the clamp.
ST 18353AA000 CLAMP PLIERS






2. Install the intake duct.
3. Install the turbocharger.
4. Install the intake manifold.
5. Install the collector cover.