Installation
Rear Trailing LinkINSTALLATION
CAUTION:
^ Be sure to use a new self-locking nut.
^ Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
Install in the reverse order of removal.
Tightening torque:
Rear trailing link to Rear sub frame
120 Nm (12.2 kgf-m, 88.5 ft-lb)
Rear trailing link to Rear housing
80 Nm (8.2 kgf-m, 59 ft-lb)