Crankshaft Main Bearing

Cylinder block connecting bolts
(1) - (11), (13) 25 N-m (2.5 kgf-m, 18.4 ft-lb)
(12), (14) 20 N-m (2.0 kgf-m, 14.8 ft-lb)





Retighten
(1) - (11), (13) 25 N-m (2.5 kgf-m, 18.4 ft-lb)
(12), (14) 20 N-m (2.0 kgf-m, 14.8 ft-lb)





Tighten all bolts further 90 degrees - 110 degrees





Upper bolt to cylinder block 25 N-m (2.5 kgf-m, 18.4 ft-lb)

Main bearing
Bearing size (Thickness at center)
#1, #3, #5, #7
Standard 1.992 - 2.005 mm (0.0784 - 0.0789 in)
0.03 mm (0.0012 in) US 2.011 - 2.014 mm (0.0792 - 0.0793 in)
0.05 mm (0.0020 in) US 2.021 - 2.024 mm (0.0796 - 0.0797 in)
0.25 mm (0.0098 in) US 2.121 - 2.124 mm (0.0835 - 0.0836 in)
#2, #4, #6
Standard 1.996 - 2.009 mm (0.0786 - 0.0791 in)
0.03 mm (0.0012 in) US 2.015 - 2.018 mm (0.0793 - 0.0794 in)
0.05 mm (0.0020 in) US 2.025 - 2.028 mm (0.0797 - 0.0798 in)
0.25 mm (0.0098 in) US 2.125 - 2.128 mm (0.0837 - 0.0838 in)