Side Airbag Module

Side Airbag Module

INSPECTION

CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag module.

Check for the following, and replace the damaged parts with new parts.

1. With side collision (when side airbag is deployed)
- Side airbag module assembly
- Satellite safing sensor
- Side airbag sensor
- Backrest pad assembly
- Backrest frame assembly
- Backrest cover assembly

2. When damage is found by visual check
- Headrest assembly
- Bushing
- Slide rail OUT (Driver's side)
- Slide rail IN (Driver's side)
- Seat cushion pad and frame assembly
- Seat hinge cover
- Seat lifter lever
- Reclining lever
- Side airbag harness and connector on body side
- Satellite safing sensor cover and mounting bracket

3. With side collision (when side airbag is not deployed)
Check the seat, airbag module and sensor visually, and then replace them with new parts if damaged or cracked.
Specially inspect the damage of airbag module body, mounting bracket and harness connector.
4. Without side collision (dirt and damage of cover) Replace the corresponding part with a new part.