Caution

CAUTION

1. Never connect the battery in reverse polarity. Doing so may immediately damage the auto A/C control module.
2. Do not disconnect the battery terminals while the engine is running. A large counter electromotive force will be generated in the generator, and this voltage may damage electronic parts such as auto A/C control module etc.
3. Before disconnecting the connectors of sensors and the auto A/C control module, be sure to turn off the ignition switch. Auto A/C control module may be damaged.
4. Every A/C-related part is a precision part. Do not drop them.
5. Airbag system wiring harness is routed near the A/C control panel and junction box.

CAUTION:
- Do not use electrical test equipment on wiring harness and connector circuits of the airbag system.
- Be careful not to damage the airbag system wiring harness when servicing the A/C control panel and junction box.