Front Door Latch: Service and Repair

Front Door Latch and Door Lock Actuator Assembly

REMOVAL

1. Remove the front door trim.
2. Remove the cable from the front inner remote.
3. Remove the sealing cover.
4. Remove the front door glass.
5. Remove the rear sash.
6. Open the handle rod cover of the latch assembly.
7. Remove the three screws.






8. Remove the front door latch and door lock actuator assembly, and disconnect the connector.

INSTALLATION

Install in the reverse order of removal.

DOOR LOCK ASSEMBLY

Tightening torque: N.m (kgf.m, ft.lb)
T1: 6.5 (0.66, 4.8)
T2: 7.5 (0.76, 5.5)
T3: 18 (1.8, 13.3)