License Plate Bulb: Service and Repair

License Plate Light

REMOVAL

1. SEDAN MODEL
1. Disconnect the ground cable from the battery.
2. Remove the trunk lid trim.
3. Turn and remove the bulb socket (A).






4. Remove the bulb.

2. WAGON MODEL
1. Disconnect the ground cable from the battery.
2. Remove the license plate light mounting screw (A) and then remove the lens (B).






3. Remove the bulb.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 1.5 N.m (0.15 kgf.m, 1.1 ft.lb)