Removal

AT Shift Lock Solenoid and "P" Range Switch

REMOVAL

1) Remove the grip.
2) Remove the hand brake boot cover.
3) Remove the console front panel.





4) Remove the console cover and console box.
5) Remove the indicator assembly.





6) With the shift lock release button held down, move the select lever to the "N" range.
7) Remove the spacer bolt and remove the plate guide COMPL.





8) Using a flat-tip screwdriver with a thin tip, remove the connector from the plate COMPL.





9) With detent spring lifted up, push the select lever backward and remove the shift lock solenoid unit.





10) Raise the claw of connector.





11) Disconnect the terminals of "P" range switch and shift lock solenoid unit from the connector, using a flat-tip screwdriver with a thin tip.