Crankshaft Gear/Sprocket: Service and Repair
Crank SprocketREMOVAL
NOTE: Perform the work with the engine installed to body when replacing a single part.
1) Remove the V-belts.
2) Remove the crank pulley.
3) Remove the front chain cover.
4) Remove the timing chain assembly.
5) Remove the crank sprocket (A).
INSTALLATION
1) Install the crank sprocket (A).
2) Install the timing chain assembly.
3) Install the front chain cover.
4) Install the crank pulley.
5) Install the V-belts.
INSPECTION
1) Check the crank sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between crank sprocket and key.