Center Console

CENTER CONSOLE

REMOVAL

1. CENTER PANEL

1. Insert the lower slit of center panel to plastic clip remover and then lift up the panel.
2. Remove the claws and plastic hook and then remove the center panel.






2. CONSOLE FRONT PANEL

1. Remove the console box.
2. Remove the shift knob.
3. Remove the plastic hook (A), and then lift up the console front panel.
4. Disconnect the connector and then remove the console front panel.






NOTE: When removing the console front panel, pull it in the direction of the rear vehicle.

5. Remove the screws and clip to remove the console side cover.









NOTE: Pull it in the direction of the rear vehicle.

3. ORNAMENT PANEL

- DRIVER'S SIDE

1. Remove the plastic hook (A), and then remove the instrument panel side cover LH.






2. Remove the plastic hook (A), and then remove the meter visor.






NOTE: Remove the plastic hook which located in lower side of meter visor, pull it towards you.

3. Loosen the screws, and then remove the claws and ornament panel LH.






- PASSENGER'S SIDE

1. Remove the instrument panel lower cover.
2. Remove the plastic hook (A), and then remove the meter visor.






NOTE: Remove the plastic hook which located in lower side of meter visor, pull it towards you.

3. Insert the lower slit of center panel to plastic clip remover and then lift up the panel.
4. Remove the claws and plastic hook and then remove the center panel.






5. Remove the plastic hook (A), and then remove the instrument panel side cover RH.






6. Loosen the screws, and then remove the plastic hooks and ornament panel RH.






7. Disconnect the connector.

4. INSTRUMENT PANEL LOWER

1. Remove the console box.
2. Center panel.
3. Console front panel
4. Remove the ornament panel RH.
5. Remove the instrument panel lower cover.
6. Remove the glove box lid.
7. Remove the screws and nuts, and then remove the instrument panel lower.

NOTE: White arrowed screw is tightened at backside of the panel.

INSTALLATION
Install in the reverse order of removal.