Cowl Moulding / Trim: Service and Repair

COWL PANEL

Cowl Panel:

REMOVAL

1. Open the front hood.
2. Remove the wiper arm.
3. Remove the cowl panel side.






4. Remove the clips (A) and (B), and remove the cowl panel.






CAUTION:
- When removing the clip (B), pushing clip claws from both side.
- Be careful because the clip can be damaged if you pull unnecessarily hard on them.






INSTALLATION

Install in the reverse order of removal.

NOTE: Hook the claw of the cowl panel on the lower end of the wind shield.