Power Steering Fluid Reservoir: Service and Repair

Reservoir Tank

REMOVAL
1. Drain fluid from the reservoir tank.
2. Disconnect the hose from reservoir tank.

CAUTION: To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.





^ H4 model





^ H6 model

3. Remove the reservoir tank from body.

INSTALLATION
1. Install the reservoir tank to body.
Tightening torque: 13 Nm (1.32 kgf-cm, 9.6 ft. lbs.)
2. Connect the hose to reservoir tank.





^ H4 model





^ H6 model
3. Feed the power steering fluid to specified level.

INSPECTION
Check the reservoir tank for cracks, breakage and damage. If a failure is found, replace the reservoir tank.