Transmission Gear Oil Replacement

Transmission Gear Oil

REPLACEMENT
1. Pull out the oil level gauge.
2. Lift-up the vehicle.





3. Drain transmission gear oil completely.

CAUTION: Be careful not to burn yourself, because transmission gear oil becomes extremely hot after running.

NOTE:
- Tighten the transmission gear oil drain plug after draining transmission gear oil.
- Use a new gasket.

Tightening torque: 70 Nm (7.1 kgf-cm, 51 ft. lbs.)
4. Lower the vehicle.
5. Pour gear oil through the gauge hole.
Recommended gear oil: GL-5 (75W-90) or equivalent
Gear oil capacity: 3.5 l (3.7 US qt. 3.1 Imp qt)
6. Check the level of transmission gear oil.

CAUTION: The level should be within the specified range marked on the gauge.