Passenger's

Passenger's Airbag Module

REMOVAL

CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag module.

1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the instrument panel.




4. Remove the pawl and remove the passenger's airbag module.
5. Refer to "CAUTION" for handling of a removed airbag module.

INSTALLATION

CAUTION: Refer to "CAUTION" of General Description before handling the airbag module.

Install in the reverse order of removal.

Tightening torque: 7.4 N.m (0.75 kgf-m, 5.5 ft-lb)